Податотека:Optical flat interference.svg

Од testwiki
Прејди на прегледникот Прејди на пребарувањето
Изворна податотека (SVG податотека, номинално 1.417 × 1.188 пиксели, големина: 48 КБ)

Оваа податотека е од Ризницата и може да се користи во други проекти. Описот од нејзината описна страница е прикажан подолу.

Опис

Опис
English: Diagram showing how interference fringes are created by an optical flat. The upper object is a section of a glass optical flat resting on another flat reflective surface. Light rays (red) from a monochromatic light source pass through the flat and reflect from both the bottom surface of the glass and the surface it is resting on. Since there is a tiny gap between the two surfaces, the ray reflecting off the bottom surface travels a greater distance than the top ray. It also experiences a 180° phase change at the reflection from the bottom plate (the reflection from the top plate causes no phase change). The parallel rays superpose. At locations (a) where the extra distance travelled by the 2nd ray (twice the width of the gap) is equal to an even multiple of a half-wavelength (λ/2) of the light the two reflected waves will be in phase and will add, reinforcing each other, resulting in a bright reflected ray. This is called constructive interference. At other locations (b) the path difference between the rays is equal to an odd multiple of λ/2, so the reflected waves are 180° out of phase. They subtract, canceling each other out, resulting in little or no reflected light. This is called destructive interference.

When the two surfaces are not parallel, as in the diagram, this results in a pattern of alternating bright and dark bands visible on the surface, called interference fringes. Two adjacent interference fringes represent a difference in height of the surface of one-half wavelength of the light used, so interference patterns can be used to measure the flatness of surfaces to millionths of an inch.

In this diagram the width of the gap and the wavelength of the light waves is greatly exaggerated; light has wavelengths around 10-7 meter.
Русский: Интерференция в тонком воздушном клине
Датум
Извор сопствено дело
Автор Chetvorno
Други верзии
SVG разработка
InfoField
 SVG-кодот е исправен.
 Оваа векторска слика е изработена со Inkscape.
 Оваа податотека користи преводлив вграден текст што може лесно да се преведе.

Лиценцирање

Јас, праводржецот на ова дело, со ова го објавувам истото под следнава лиценца:
Creative Commons CC-Zero Оваа податотека е достапна под лиценцата Криејтив комонс CC0 1.0 Предавање во јавна сопственост.
Лицето поврзано со делото со овој документ го има предадено истото во јавна сопственост, откажувајќи се од сите права на тоа дело за цел свет, под законот за авторско право и поврзани или сродни законски права што ги имало на тоа дело, дотолку колку што е дозволено со закон. Делата под CC0 не бараат припишување (наведување автор и/или извор). Кога го наведувате делото, наводот не треба да подразбира каква било поддршка од авторот.

Описи

Опишете во еден ред што претставува податотекава
Diagram showing how interference fringes form

Предмети прикажани на податотекава

прикажува

3 март 2012

1.188 пиксел

1.417 пиксел

Историја на податотеката

Стиснете на датум/време за да ја видите податотеката како изгледала тогаш.

Датум/времеМинијатураДимензииКорисникКоментар
тековна16:45, 16 јануари 2022Минијатура на верзијата од 16:45, 16 јануари 20221.417 × 1.188 (48 КБ)wikimediacommons>Aiden1123Reverted to version as of 03:54, 9 May 2017 (UTC)

Податотекава се користи во следнава страница: